New Year Sale: Use Code PRINT25 for 25% OFF All Orders!
+1-877-868-7768 | [email protected] | FREE Shipping Over $100
Industry Trends

The Pre-Order Checklist I Use Before Approving Any Print or Packaging Order

I'm the office administrator for a 180-person company. I manage all the print, packaging, and promo ordering — roughly $120K annually across about a dozen vendors. I report to operations and finance, which means when something goes wrong, I hear about it from two directions.

This checklist is for anyone who places orders for printed materials, packaging, signage, or branded merch. It's the thing I wish I'd had in 2020 when I approved a rush order on a handwritten invoice and finance rejected the expense. I ate $1,400 out of the department budget on that one.

There are eight steps. Most take under five minutes. All of them are cheaper than reprinting.

Step 1: Verify the vendor is still who you think they are

This sounds obvious until it isn't. When I was sourcing packaging for a medical device client back in 2023, Bemis Company kept showing up in directories and supplier lists. I tried to pull up the bemis company, inc. stock ticker to check financial health — standard due diligence — and realized they'd been acquired by Amcor back in 2019 and delisted. The old ticker (BMS) just returns a "no longer trading" notice now.

That's not a knock on Bemis or Amcor. It's a reminder that supplier directories, trade show lists, and even Google results go stale. Before you commit to a vendor, check the current corporate structure. Who owns them? Are they still independent? Has the entity you're contracting with actually changed?

Roughly speaking, about a third of the vendor lists I've inherited over the years had at least one company that had been acquired or merged since the list was last updated.

Step 2: Look for actual manufacturing photos, not stock images

I don't need a full factory audit for a $500 order. But I do want to see evidence the vendor has real production capacity. When I'm vetting a new packaging supplier, I search the same way a curious buyer would — "bemis manufacturing company photos" — and see what actually comes up. I want factory floor shots, equipment photos, employees at workstations. Not the polished stock imagery that makes every company look identical.

Why does this matter? Because when you're ordering custom packaging or custom print, the vendor's actual equipment determines what they can produce. A company that only runs digital presses can't do a 5,000-unit offset run at a competitive price. A company that only does small-format can't handle a large-format display.

Google Maps street view is surprisingly useful here. So is LinkedIn — check whether they have production staff listed. If the entire company appears to be three salespeople and a website, that's a signal.

Step 3: Nail the physical specs before design starts

Most reprints happen because the file didn't match the spec, not because the printer made a mistake. Before you send anything to a designer, lock down:

  • Final dimensions — in inches and millimeters, both
  • Resolution at final size — 300 DPI for anything held in hand, 150 DPI minimum for large-format pieces viewed from a few feet away
  • Color mode — CMYK for print, and if you have a brand color, get the Pantone reference and the CMYK conversion from the printer, not from a free online tool
  • Bleed and safe zones — typically 0.125" bleed on small format

Take something as straightforward as an action movie poster. You'd think a poster is a poster. But a 24×36 poster viewed from 3 feet away needs different resolution than a 27×40 one-sheet viewed from 10 feet. And the color profile for a poster printed on glossy stock is not the same as one printed on matte.

I'm not 100% sure why so many people skip this step, but I suspect it's because specs feel like the designer's job. They're not. The buyer owns the spec. The designer works to it.

Step 4: Match the material to the actual use case

This is the step most people skip, and it's where the weird requests come from. Someone in marketing asks for "sturdy cardboard" and doesn't specify what "sturdy" means. Someone in facilities asks whether corrugated boxes can be used for a temporary structure, and you have to explain that a homeless cardboard box house is not what corrugated is rated for — it's rated for stacking and shipping, not weather and weight bearing.

The material spec sheet tells you: burst strength, edge crush test rating, basis weight, coating. For packaging, ask for the ECT (edge crush test) value. For printed pieces, ask for the paper weight in both text and cover terms, plus gsm.

Standard paper weight equivalents I keep handy: 20 lb bond = 75 gsm (copy paper), 80 lb text = 120 gsm (brochure), 80 lb cover = 216 gsm (business card). Conversions are approximate, so confirm with your printer.

Step 5: Test assembly and adhesives before bulk approval

If your order involves any post-print assembly — folding, gluing, mounting, attaching — test it on a sample first. This is where a lot of "we can't use these" complaints come from.

A question I get fairly often from our marketing team: "Can I use a hot glue gun on fabric?" The honest answer is: it depends, and usually no for anything long-term. Hot glue adheres to fabric initially and then peels as the fabric flexes. For banners, flags, or fabric displays, you want a fabric-specific adhesive or mechanical fastening. Test a sample before committing to 200 units.

Part of me thinks this step is overkill for small orders. Another part remembers the time we mounted 150 foam-core signs with the wrong adhesive and they all fell off the wall within a week. I compromise: always test one unit. Five minutes, one sample, one honest check.

Step 6: Get a physical proof or sample — not a PDF

PDF proofs catch typos. Physical proofs catch everything else: color shift, paper feel, cut accuracy, fold alignment. For anything over $1,000, I ask for a physical proof. For repeat orders, I ask for a "press check" or a cutting from the actual run.

I'm not going to pretend this always works. When I had two hours to approve a rush reprint before the deadline for a trade show, I skipped the physical proof and went with the PDF. It worked out, but I was lucky. In hindsight, I should have pushed the deadline back by a day. The $80 proof would have been cheaper than the anxiety.

Step 7: Confirm invoicing and payment terms in writing

This is the step that cost me $1,400 back in 2020, so I never skip it now. Before you place any order, confirm:

  • Can the vendor issue a proper invoice with a tax ID?
  • What are the payment terms — net 30, prepay, card only?
  • Is there a PO requirement on your side?
  • Who is the billing contact?

A handwritten receipt is not an invoice. A text message confirming price is not a contract. If the vendor can't produce proper documentation, they're not a vendor your finance team will process.

Step 8: Run a five-minute pre-submission check

Before you hit send or sign the PO, run this:

  1. Open the final file or spec sheet one more time. Confirm dimensions, color mode, resolution, bleed.
  2. Read the order acknowledgment from the vendor. Not the quote — the acknowledgment. Make sure quantities, materials, and delivery dates match what you approved.
  3. Confirm the ship-to address and the receiving hours.
  4. Note the deadline in your calendar with a 48-hour buffer.
  5. Send a one-line confirmation to your internal stakeholder: "Ordering X, arrives Y, cost Z."

So glad I started doing this. The first time I caught a quantity error in an acknowledgment — the vendor had entered 1,000 instead of 100 — I was one click away from a very awkward conversation with finance. Five minutes of verification beats five days of correction.

Common mistakes worth avoiding

Relying on old supplier lists. Companies get acquired. Bemis is a textbook example — a company everyone in packaging knew, now a subsidiary of Amcor. If you're working from a list older than 18 months, verify each entry.

Trusting stock photos. Anyone can license a factory image. Look for specific, consistent photos of actual facilities. If the same "factory" photo appears on three different vendor sites, that's a stock image.

Skipping the material test. The most common mistake I see is ordering materials based on a generic description — "cardboard," "fabric," "adhesive" — without checking the actual spec. A homeless cardboard box house might sound like a straightforward use of corrugated, but the material isn't rated for it. Check the spec sheet.

Assuming adhesives are universal. Hot glue on fabric, spray adhesive on coated stock, tape on damp surfaces — these are all common mismatches. Test one sample.

Not asking about invoice capability. I'll say it again: if they can't invoice properly, finance won't pay. Confirm before you order.

None of this is glamorous. It's basically a list of things to double-check. But in five years of doing this, the orders that went smoothly were never the ones I rushed. They were the ones where I spent an extra five minutes before hitting send.

$blog.author.name

Jane Smith

Sustainable Packaging Material Science Supply Chain

I’m Jane Smith, a senior content writer with over 15 years of experience in the packaging and printing industry. I specialize in writing about the latest trends, technologies, and best practices in packaging design, sustainability, and printing techniques. My goal is to help businesses understand complex printing processes and design solutions that enhance both product packaging and brand visibility.

Ready to Create Your Standout Business Cards?

Get professional printing with fast turnaround and use code PRINT25 for 25% off your first order.

Related Articles